Notes for x ray luggage screening
x ray luggage screening is a widely used detector. Before using the metal detector, you need to adjust the length of the detection rod. Just loosen the black glue tube, push and pull the rubber tube to a suitable length, and then rotate the rubber inner tube to wind the cable tightly and make the handle tip upward , And finally tighten the black glue tube to lock the glue tube sleeve. In this way, when you hold the handle of the detector, your thumb is just next to the sensitivity adjustment potentiometer.
Notes for x ray luggage screening:
1. Don't forget to turn off the power after use.
2. The manufacturer of x ray luggage screening tells you that you should take out the battery if you don't need it for a long time.
3. When the probe is fixed to a metal object, it does not make any sound or vibration, only when it sweeps over the metal object, it makes a sound or vibration.
4. The manufacturer of x ray luggage screening tells you to turn off the power switch (8) when charging. Charger voltage: AC 9V; DC 10V. (The charger comes with itself)
The above are the problems that the manufacturer of x ray luggage screening will take you to know about, and hope to help you.
[ Friendly Links ]
X Ray Inspection System,Container & Vehicle Scanner, Under Vehicle Scanning System, Explosives and Narcotics Detection, Liquid Scanner,Walk Through Metal Detectors, Explosive Disposal Device